Hi Carlos,
Regarding to your questions, our reply as follows:
First of all, read the following technical data
Specification | pushing force(Ton) | Expansion distance(mm) | Net weight(kgs) |
1m*1m | 40-50 | 500 | 4.8 |
1m*1.5m | 65-75 | 600 | 7.2 |
1.5m*1.5m | 80-100 | 650 | 8.3 |
2m*1.5m | 110-150 | 760 | 10.4 |
2m*2m | 160-200 | 10050 | 12.2 |
Secondly, refer to the relevant parameters and choose according to the requests. There are 3 quality grade, 2A, 3A an 6A.
Thirdly, It is necessary to buy a professional controller if you want to use 4 pieces of air bag together.
The simple controller can operate max. Only 2 pieces. Both controllers can be connected to 375HP compressor
Professional controller
Simple controller
Fourthly,for block 6mt x 2mt x 6.5mt and 220 tons weigh, it can choose 4 pieces of 2m*2m, two pieces of superimposed air bag, like the below picture
For block 20mt x 3mt x 7mt and 1,000 tons approximately,it need to be equipped with 12 pieces of 2.5x2.0m and 6 pieces of 2*1.0M air bag
Remarks: When putting two superimposed air bags, you need to use a 2*1M air bag first to push open 10-15CM, which is more convenient for this operation.
Fifthly, Each set of products comes with 10meter of 12mm hose, quick connector, maintenance kit and operation manual.
The lifespan of air bag is related to the operating habits, the use environment and the smoothness of the square material.
The operation is reasonable and can be used for more than one year.
The air bag can be reused many times. Even if it is damaged,
it can be repaired and used again to maximize the use of the product.
Best regards
Michael Zhong